Dyena Pipe Supports manufactures and supplies
Hanging Clamps in Goa for suspended piping
installations used in commercial buildings, industrial facilities,
HVAC projects, construction sites and infrastructure applications.
These pipe support components are designed to hold pipes securely
beneath suitable supporting structures while helping maintain
consistent positioning throughout the installation. They are
applicable to HVAC, chilled water, plumbing, refrigeration,
fire protection and industrial process piping systems.
The clamps are manufactured using high-grade steel
and can be supplied with an electrogalvanized finish in accordance
with ASTM B 633. The split construction provides
practical access during fitting, inspection and maintenance.
Where an EPDM insert is specified, it forms a
cushioning layer between the clamp and pipe, helping reduce
vibration and operational noise while limiting direct metal-to-metal
contact. Supply can be arranged for projects in
Panaji, Vasco da Gama, Margao, Mapusa, Ponda, Bicholim,
Porvorim, and other locations across Goa.
Hanging Clamps for Goa's Commercial & Industrial Projects
Suspended piping systems require properly selected support hardware
to maintain pipe position and provide stability during operation.
Dyena Pipe Supports supplies
Hanging Clamps in Goa for piping installations
associated with HVAC, plumbing, chilled water,
refrigeration, fire protection and industrial services.
The split clamp arrangement provides a practical method of securing
pipes from overhead support points while allowing access for
installation and subsequent maintenance.
Hanging Clamps are particularly useful where pipes need to be
suspended below ceilings, structural members or other suitable
support points. Depending on the selected product configuration,
an EPDM insert can provide a cushioning interface
around the pipe and help limit vibration, noise and direct
metal-to-metal contact. Dyena Pipe Supports can supply pipe support
requirements for commercial buildings, hospitality projects,
industrial facilities, engineering installations, infrastructure
work and utility systems across
Panaji, Vasco da Gama, Margao, Mapusa, Ponda, Bicholim,
Porvorim and other areas of Goa.
Key Benefits
Why Hanging Clamps Matter for Goa Piping Systems
Hanging Clamps provide a practical method of supporting suspended
piping in HVAC, plumbing, industrial, commercial and infrastructure
installations throughout Goa.
Hanging Clamps help create an organized support
arrangement for overhead piping by securing the pipe at designated
support points. Where an EPDM lining is included,
the resilient insert can act as a cushioning interface that helps
reduce vibration and operational noise. It also helps separate
the metal clamp from the pipe surface. The split design
makes fitting and access more convenient during installation,
inspection and maintenance activities.
Depending on size and design, the specified load capacity of these
Hanging Clamps is approximately 450 kg to 950 kg.
Product options can include electrogalvanized,
hot-dip galvanized and stainless-steel finishes or
materials according to application requirements. These options
make the clamps suitable for pipe support needs involving
HVAC, chilled water, plumbing, refrigeration, fire
protection and industrial process piping across Goa.
Key Features
Key Features of Our Hanging Clamp
Designed for practical pipe suspension, our Hanging Clamps combine
a split construction with suitable material and finish options for
HVAC, plumbing, industrial and commercial piping projects in Goa.
EPDM Cushioning
Where an EPDM insert is provided, it creates a protective
interface between the clamp and pipe and can help reduce
vibration and operational noise.
Specified Load Range
Depending on the applicable size and design, the specified
load capacity is approximately 450 kg to 950 kg for
supported piping applications.
Split Construction
The split-body design allows convenient fitting around the
pipe and provides practical access for inspection,
maintenance and adjustment.
Wide Temperature Range
The specified temperature range is -20°C to 110°C, with
final suitability depending on the selected materials,
pipe service and installation conditions.
Technical Specifications
Hanging Clamp Specifications
Hanging Clamps are available with different construction,
material, finish and hardware options to accommodate a range
of suspended pipe support requirements.
Construction Features
Strengthened lock bolts for secure pipe support
Suitable for horizontal and vertical installation
Specified temperature range: -20°C to 110°C
Cross-recessed head lock bolts
Grooved construction for added structural support
Material Options
Premium-grade steel construction
EPDM insert for cushioning where specified
Electrogalvanized finish as per ASTM B 633
Hot-dip galvanized option
Stainless-steel option for selected applications
Hardware Details
Welded Nut M8/M10 with M10/M12 option
M6 Side Nuts available on request
Cross-recessed head bolts
Corrosion-resistant finish options
High-strength threaded connections
Plain Hanging Clamp
Product Dimensions
Product Code
Nominal Size (IN)
Pipe Size MM
Pipe OD (mm)
Range (MM)
Nut Size (A)
Side Screw Size
Max Load (KG)
DPPH015
3/8"
DN10
17.1
15-19
M8XM10
M6
450
DPPH022
1/2"
DN15
21.3
20-25
M8XM10
M6
450
DPPH028
3/4"
DN20
26.7
26-30
M8XM10
M6
450
DPPH035
1"
DN25
33.4
32-36
M8XM10
M6
450
DPPH040
1 1/4"
DN32
42.1
38-43
M8XM10
M6
450
DPPH048
1 1/2"
DN40
48.2
47-51
M8XM10
M6
450
DPPH054
-
-
54
53-58
M8XM10
M6
450
DPPH060
2"
DN50
60.3
60-64
M8XM10
M6
450
DPPH070
-
-
70
68-72
M8XM10
M6
450
DPPH075
2 1/2"
DN65
73
74-80
M8XM10
M6
600
DPPH083
-
-
83
81-86
M8XM10
M6
600
DPPH090
3"
DN80
88.9
87-92
M8XM10
M6
600
DPPH110
-
-
110
107-112
M8XM10
M6
600
DPPH115
4"
DN100
114.3
113-118
M8XM10
M6
600
DPPH125
-
-
125
125-130
M8XM10
M6
600
DPPH160
-
-
160
159-166
M8XM10
M6
600
DPPH168
6"
DN150
168.3
168-172
M8XM10
M8
600
DPPH200
8"
DN200
219.1
215-220
M8XM10
M8
950
DPPH250
10"
DN250
273
269-274
M8XM10
M8
950
Applications
Applications of Hanging Clamps in Goa
Reliable suspended pipe support solutions for HVAC, industrial, commercial, infrastructure, and
utility piping systems across Goa.
Industrial & Infrastructure Projects
Hanging Clamps are used for supporting suspended utility, plumbing, HVAC, and process piping
in industrial and infrastructure projects across Goa.
Pharmaceutical & Process Plants
Suitable for pharmaceutical and process facilities where organized pipe routing, secure
suspension, and cushioning of supported piping are required.
Chemical & Process Industries
Used for supporting process, service, and utility pipelines in chemical and industrial
facilities where dependable pipe support arrangements are required.
Engineering & Manufacturing
Suitable for manufacturing units, fabrication facilities, engineering projects, and
industrial installations requiring stable suspended piping support.
HVAC & Chilled Water
Commonly used as an HVAC Clamp in Goa for supporting chilled-water, air-conditioning,
ventilation-related, and associated piping systems in buildings.
Fire Protection Systems
Suitable for suspended fire sprinkler and fire protection piping in residential, commercial,
industrial, and other building projects.
Plumbing & Water Systems
Supports water supply, drainage, utility, and wastewater-related piping where secure pipe
suspension is required for commercial and industrial installations.
Utilities & Power Systems
Used for supporting utility, cooling-water, steam, and other piping services associated with
power, utility, and large infrastructure installations.
Why Choose Us
Why Choose Dyena Pipe Supports for Hanging Clamps in Goa
As a Hanging Clamp Manufacturer in Goa, Dyena Pipe Supports focuses on dependable products, suitable
configurations, consistent quality, and practical support for different piping applications.
01
Application Understanding
We cater to the requirements of HVAC, plumbing, construction, industrial, and infrastructure
projects, helping customers select suitable Hanging Clamp configurations for suspended
piping.
02
Manufacturer-Based Pricing
As a manufacturer and supplier of pipe support products, we work to provide competitive
solutions while maintaining attention to product dimensions, materials, finishes, and
construction quality.
03
Goa-Wide Supply Support
Our Hanging Clamp supply support extends across Goa, serving requirements from Panaji, Vasco
da Gama, Margao, Mapusa, Ponda, Porvorim, Bicholim, and other project locations.
04
Multiple Product Options
Suitable material, finish, size, and configuration options can be considered according to
project requirements, pipe dimensions, installation conditions, and suspended piping
applications.
Manufacturing Process
Hanging Clamp Manufacturing Process
Our manufacturing approach covers material selection, component preparation, forming, assembly,
finishing, and inspection to maintain consistent Hanging Clamp quality.
1
Material Selection
Steel and other required materials are selected according to the Hanging Clamp design,
intended application, size, and required construction characteristics to support dependable
pipe suspension.
2
Component Forming
Metal components are formed and prepared to achieve the required profile, dimensions, and
shape of the clamp, helping provide proper fit around the supported pipe.
3
Assembly & EPDM Fitting
Bolts, nuts, inserts, and other specified components are assembled according to the product
configuration. EPDM lining is incorporated where required to provide cushioning between the
clamp and pipe.
4
Finishing & Inspection
Completed Hanging Clamps receive the applicable surface finish followed by dimensional and
assembly checks before packing and dispatch, helping maintain consistency from batch to
batch.
Quality Control & Testing
Quality-Focused Hanging Clamp Manufacturing
Our inspection process focuses on the dimensional accuracy, construction, materials, finish,
hardware, and assembly of Hanging Clamps before dispatch.
As a Hanging Clamp Manufacturer in Goa, Dyena Pipe Supports gives attention to
quality at different stages of production. Hanging Clamps are checked for dimensions,
construction, material, surface finish, hardware, and overall assembly to help
achieve proper fit and dependable support in suspended piping applications. Where an
EPDM insert is specified, its fit and placement are checked to ensure the
cushioning component is properly positioned between the clamp and pipe. For applicable products,
the electrogalvanized finish is specified as per ASTM B 633 to provide a
protective zinc coating and support corrosion-resistant performance.
Before packing and dispatch, quality checks help verify the consistency of the finished
Hanging Clamps against applicable product requirements. Attention is given to
dimensional accuracy, component assembly, surface finish, construction, and specified
load-related requirements. These checks support applications such as HVAC,
chilled water, plumbing, fire protection, refrigeration, water systems, and industrial
process piping. Customers looking for a Pipe Support Manufacturer in
Goa can use these products for projects where properly configured suspended pipe
support is required.
Materials Used
Materials & Finishes for Hanging Clamps
Dyena Pipe Supports uses suitable metals, inserts, and protective finishes according to the Hanging
Clamp configuration and requirements of the piping application.
Premium Steel
Steel construction provides the structural body of the clamp and is selected to support the
required dimensions, strength, and load-bearing characteristics of suspended piping systems.
EPDM Insert
EPDM inserts, where specified, act as a cushioning interface between the metal clamp and
pipe while helping reduce vibration, operational noise, and direct metal-to-metal contact.
Electrogalvanized Finish
Electrogalvanized coating provides a protective zinc layer that helps improve resistance to
corrosion. Applicable electrogalvanized finishes are specified as per ASTM B 633.
Stainless Steel Option
Stainless-steel options can be considered for applications requiring enhanced corrosion
resistance or specific material characteristics for the installed pipe support system.
Installation Guide
How To Install Hanging Clamps Correctly
Proper installation helps maintain secure pipe suspension and allows the Hanging Clamp to perform
according to its intended configuration and application requirements.
1
Place the Clamp
Open the split Hanging Clamp and position it around the pipe at the designated support
point. Ensure the clamp is correctly aligned with the planned suspension arrangement.
2
Align the Hardware
Bring the clamp sections together and align the bolt holes correctly. Insert the specified
bolts and hardware according to the selected clamp configuration.
3
Tighten Evenly
Tighten the bolts evenly so the pipe is held securely. Avoid excessive tightening that could
unnecessarily compress the clamp or EPDM insert where one is provided.
4
Check the Installation
Inspect the clamp alignment, hardware tightness, pipe position, and EPDM insert placement
where applicable before completing the suspended pipe support installation.
Industries We Serve
Hanging Clamp Solutions for Industries in Goa
Our Hanging Clamps are suitable for a variety of commercial, industrial, construction, engineering,
and infrastructure applications requiring organized and secure suspended pipe support.
HVAC
Fire Protection
Water Treatment
Construction
Industrial Manufacturing
Engineering Projects
Plumbing
Refrigeration
Power & Utilities
Process Industries
Competitive Advantages
Advantages of Choosing Our Hanging Clamps
As a Hanging Clamp Manufacturer in Goa, Dyena Pipe Supports focuses on product
consistency, suitable configurations, dependable supply, and application-oriented pipe support
solutions.
Consistent Product Quality
Our Hanging Clamps are produced and inspected with attention to dimensions, construction,
materials, surface finish, hardware, and overall assembly to support consistent product
quality.
Dependable Supply Support
We support requirements across Goa for HVAC, plumbing, commercial, industrial, construction,
and infrastructure projects, supplying Hanging Clamps for a range of suspended piping
applications.
Application-Focused Assistance
We work with contractors, engineers, HVAC professionals, fabricators, and project teams to
understand pipe support requirements and identify suitable Hanging Clamp sizes, materials,
finishes, and configurations.
Related Products
Explore Our Range of Pipe Supports
Complete pipe support solutions for every application — discover our full product portfolio.
Contractors, engineers, HVAC professionals, and project teams
choose our Hanging Clamps for suspended pipe support requirements
across commercial, industrial, and infrastructure projects in Goa.
"The Hanging Clamps provide a convenient option for our
suspended piping work. Their practical design makes them
suitable for HVAC and general pipe support installations
where secure positioning is required."
Customer Feedback
– HVAC & Pipe Support Project in Goa
"The split construction makes the Hanging Clamps easy to
position around the pipe during installation. The choice
of material and surface finish also helps us select a
suitable pipe support option for different projects."
Customer Feedback
– Commercial Piping Project in Goa
"We look for consistent dimensions, suitable finishes,
and dependable support when selecting pipe support
components. The Hanging Clamp range is useful for our
industrial and engineering piping requirements."
Customer Feedback
– Industrial Piping Application in Goa
FAQ
Frequently Asked Questions About Hanging Clamps
Get answers to common questions about Hanging Clamps, materials,
sizes, load capacity, applications, installation, and pipe support
solutions available for projects in Goa.
A Hanging Clamp is a pipe support component used to hold and
suspend pipes from an overhead supporting structure. It helps
keep piping in the required position and is suitable for HVAC,
plumbing, refrigeration, fire protection, chilled-water, and
industrial piping systems. An EPDM insert, where specified,
can provide cushioning between the clamp and pipe.
Dyena Pipe Supports supplies Hanging Clamp solutions for
commercial, industrial, HVAC, construction, and infrastructure
requirements in Goa. As a Hanging Clamp Manufacturer in Goa,
we offer product configurations based on applicable pipe size,
material, finish, and installation requirements. Customers can
discuss their project specifications to identify a suitable
pipe support solution.
Hanging Clamps can be manufactured using suitable steel
materials, with an EPDM insert where specified. Electrogalvanized
finishes as per ASTM B 633 can provide zinc-based
surface protection. Depending on the application, hot-dip
galvanized and stainless-steel options may also be considered.
Hanging Clamps can be used in HVAC and chilled-water systems,
plumbing networks, refrigeration installations, fire protection
piping, industrial process systems, water treatment projects,
construction, engineering, power and utility applications, and
commercial buildings throughout Goa.
The specified temperature range for the Hanging Clamps covered
on this page is -20°C to 110°C. Actual suitability
depends on the selected clamp material, EPDM insert where
applicable, pipe service, operating conditions, and the
requirements of the particular installation.
The available Hanging Clamp range covers sizes from
3/8 inch (DN10) to 10 inch (DN250), subject to
the applicable clamp design and pipe outside diameter. If a
project requires a different dimension, custom requirements
can be discussed based on the pipe size and application.
In an EPDM Hanging Clamp, the EPDM insert acts
as a cushioning layer between the metal clamp and the pipe.
Where specified, this can help reduce vibration and operational
noise while limiting direct metal-to-metal contact and helping
protect the pipe surface during service.
The specified approximate load capacity range is
450 kg to 950 kg, depending on the Hanging Clamp
size, design, and configuration. The appropriate load rating
should be selected according to the specific product
specification, pipe arrangement, and installation requirements
rather than treating the range as a universal rating.
The corrosion resistance of a Hanging Clamp depends on its
selected material and surface finish. Electrogalvanized
versions provide a protective zinc coating, while hot-dip
galvanized and stainless-steel options may be considered for
applications requiring different corrosion-resistance
characteristics.
Position the split Hanging Clamp around the pipe at the
designated support point, align the clamp sections and holes,
insert the specified hardware, and tighten the bolts evenly.
After installation, verify the pipe position, clamp alignment,
hardware tightness, and EPDM insert placement where applicable.
Custom Hanging Clamp requirements can be evaluated according
to pipe diameter, load requirements, material, finish,
installation arrangement, and application conditions. Share
the required specifications with Dyena Pipe Supports to
determine the available customization and configuration
options.
Delivery time depends on the required clamp size, quantity,
material, finish, customization, and current production
schedule. For an accurate quotation and delivery estimate,
customers can provide their Hanging Clamp specifications and
quantity to Dyena Pipe Supports.
In-Depth Product Overview
Complete Guide to Hanging Clamps in Goa
Explore the construction, materials, features, applications,
specifications, and selection considerations for Hanging Clamps
used in piping projects across Goa.
At Dyena Pipe Supports, our
Hanging Clamps are developed for suspended pipe
support applications where stable positioning and practical
installation are important. As a Hanging Clamp Manufacturer in Goa,
we cater to requirements associated with HVAC, plumbing,
refrigeration, fire protection, commercial buildings,
construction, industrial facilities, and infrastructure projects.
Where specified, an EPDM insert provides a
cushioning interface between the pipe and clamp, helping reduce
vibration and operational noise while limiting direct
metal-to-metal contact.
The clamp body surrounds the pipe and connects with the required
suspension arrangement to provide support from above. Its
split construction allows the clamp to be opened
and positioned around the pipe during installation. Correct
alignment and even tightening of the hardware are important for
maintaining a secure fit without unnecessary compression of the
pipe or insert. Selection should be based on the pipe outside
diameter, load requirements, support arrangement, and application
conditions.
Depending on the project specification, Hanging Clamps can be
supplied with different material and surface-finish options.
The applicable electrogalvanized finish is
specified as per ASTM B 633 for zinc coating
protection. Hot-dip galvanized and
stainless-steel options may also be considered
where a different material or corrosion-resistance characteristic
is required for the pipe support system.
Our Hanging Clamp range covers sizes from
3/8 inch (DN10) to 10 inch (DN250), subject to
the applicable product design and pipe outside diameter. The
specified approximate load capacity ranges from
450 kg to 950 kg, depending on the clamp size,
design, and configuration. Projects with specific dimensional,
material, or installation requirements can be discussed to
determine suitable available options.
A properly selected Pipe Support Clamp Goa solution
can be used where suspended piping needs to be organized and
supported from an overhead structure. Hanging Clamps are suitable
for HVAC and chilled-water installations, plumbing networks,
refrigeration systems, fire protection piping, industrial
process lines, and other engineering applications. When selecting
an EPDM Pipe Clamp Goa solution, factors including
pipe diameter, operating temperature, expected load, clamp
material, surface finish, insert requirement, and installation
conditions should be evaluated.
Service Areas in Goa
Hanging Clamp Supply Across Goa
As a Hanging Clamp Manufacturer in Goa, we support
commercial, industrial, HVAC, construction, engineering, and
infrastructure projects across major locations in Goa.
Panaji
Supplying Hanging Clamps for HVAC, plumbing, commercial
buildings, fire protection, and infrastructure projects
in Panaji and surrounding areas.
Vasco da Gama
Pipe support solutions for industrial facilities, HVAC
installations, utility piping, commercial projects, and
engineering applications in Vasco da Gama.
Margao
Hanging Clamps for commercial construction, plumbing,
HVAC systems, fire protection, and industrial piping
requirements in Margao and nearby project locations.
Mapusa
Supporting HVAC, plumbing, refrigeration, commercial,
construction, and engineering projects with suitable
Hanging Clamp and pipe support solutions in Mapusa.
Ponda
Hanging Clamps for industrial facilities, manufacturing,
utility piping, HVAC systems, plumbing, and infrastructure
applications in Ponda.
Bicholim
Pipe support products for industrial, commercial,
construction, HVAC, plumbing, and engineering requirements
in Bicholim and surrounding areas.
Porvorim
Supplying Hanging Clamps for commercial buildings, HVAC
installations, plumbing systems, fire protection, and
infrastructure projects in Porvorim.
Other Goa Locations
We support pipe support requirements in other parts of Goa
for HVAC, industrial, commercial, construction, engineering,
and infrastructure projects.
Nearby Areas
Additional project locations can be considered based on
product specifications, required quantity, project scope,
and applicable delivery arrangements.
Our Hanging Clamps support projects across
Panaji, Vasco da Gama, Margao, Mapusa, Ponda, Bicholim,
Porvorim, and other locations throughout Goa.
Contact Dyena Pipe Supports to discuss your pipe support
requirements and request a quotation.
Get In Touch
Need Hanging Clamps?
Contact Us Today
As a Hanging Clamp Manufacturer in Goa, Dyena Pipe
Supports provides pipe support solutions for HVAC,
plumbing, commercial, industrial, and infrastructure
applications. Contact our team to discuss your required
size, material, finish, quantity, and project requirements.
